Platinum Color Spring (Straight Rod) Chandelier-10 Lights (Crystal Ball)

Pre-order
The round lampshade, overflowing with soft light, gorgeous but not noisy, intertwined with a unique charm. As quiet as the night sky, as bright as the morning glow, illuminating the interior, beautiful and classic.
From NT 14,990(≈ USD 499.167) From NT 14,990(≈ USD 499.167)
Voltage
0

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialPrice
Crystal ballLamp body D95*W95*H100cm
Crystal ball diameter 9cm
Base diameter 10*H2cm
Total rod L40+30+20cm
G9*8Copper
Acrylic
NT$ 12,990
White glassLamp body D95*W95*H70cm
Glass diameter 10cm
Base diameter 10*H2cm
Total rod L40+30+20cm
Copper
Glass
NT$ 10,990

 

*

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialPrice
Crystal ballLamp body D95*W95*H100cm
Crystal ball diameter 9cm
Base diameter 10*H2cm
Total rod L40+30+20cm
G9*8Copper
Acrylic
NT$ 12,990
White glassLamp body D95*W95*H70cm
Glass diameter 10cm
Base diameter 10*H2cm
Total rod L40+30+20cm
Copper
Glass
NT$ 10,990

 

*

Related products

LED-G9-B18-3W/5W/9W

3000K,9W

From NT 250 (≈ USD 8.325)

LED-G9-B18-3W/5W/9W

6000K,9W

From NT 250 (≈ USD 8.325)

LED-G9-B18-3W/5W/9W

3000K,5W

From NT 230 (≈ USD 7.659)

LED-G9-B18-3W/5W/9W

6000K,5W

From NT 230 (≈ USD 7.659)

LED-G9-B18-3W/5W/9W

3000K,3W

From NT 210 (≈ USD 6.993)

LED-G9-B18-3W/5W/9W

6000K,3W

From NT 210 (≈ USD 6.993)

LINE LINE ID: @18PARKN