Escape Time Chandelier(V1)--3 sizes/3 colors

Pre-order
The river of time flows quietly, blooming in every moment, like gorgeous flowers experiencing the midsummer sunshine.
The gentle light travels through the memories of the years, injecting a warm brilliance into the space.
From NT 2,990(≈ USD 99.567) From NT 2,990(≈ USD 99.567)
Size
Color
0

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

• The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialColorPrice

20cm

Lampbody W 25cm and H 20cm
Glass lampshade diameter 20cm
Base diameter 10*H 2.5cm
Wire at least L120cm
LED*8W*4000KGlass
Iron
Aluminum
gold plated
silver plated
transparent
NT$2,990
25cmLampbody W 35cm and H 25cm
Glass lampshade diameter 25cm
Base diameter 10*H 2.5cm
Wire at least L120cm
NT$3,290
30cmLampbody W 40cm and H 30cm
Glass lampshade diameter 30cm
Base diameter 10*H 2.5cm
Wire at least L120cm
NT$3,690
產品責任險:本產品已投保新安東京海上產物產品責任保險$36,000,000元。

 

*

 

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

• The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialColorPrice

20cm

Lampbody W 25cm and H 20cm
Glass lampshade diameter 20cm
Base diameter 10*H 2.5cm
Wire at least L120cm
LED*8W*4000KGlass
Iron
Aluminum
gold plated
silver plated
transparent
NT$2,990
25cmLampbody W 35cm and H 25cm
Glass lampshade diameter 25cm
Base diameter 10*H 2.5cm
Wire at least L120cm
NT$3,290
30cmLampbody W 40cm and H 30cm
Glass lampshade diameter 30cm
Base diameter 10*H 2.5cm
Wire at least L120cm
NT$3,690
產品責任險:本產品已投保新安東京海上產物產品責任保險$36,000,000元。

 

*

 

LINE LINE ID: @18PARKN