Natural breathing chandelier-3 styles

Pre-order
The warm texture of walnut wood is simple and elegant. The perfect fusion of wood and light is as warm and comfortable as sunlight penetrating through the forest: every ray of light reveals the rhythm of nature, filling the entire space with the breath of life.
From NT 1,890(≈ USD 62.937) From NT 1,890(≈ USD 62.937)
Size
0

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

• The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialColorPrice
35cmLamp body W38*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
E27*1walnut walnut NT$1,990
60cmLamp body W60*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
NT$2,240
85cmLamp body W85*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
NT$3,100
Product Liability Insurance: This product has been insured with Tokio Marine Newa Insurance Co., Ltd. Product Liability Insurance of NT$36,000,000.

*

In response to the global environmental protection, energy saving, and carbon reduction policies, all our lamps are shipped without light bulbs. If it is necessary, you can purchase them in-store.

The beauty of natural bubbles in glass products
Hand-made glass artworks are fired at a temperature of 850°C. The air in between the glass cannot rise to the surface due to the slow flow of the hot glass, so bubbles are naturally formed. Producing "no manual traces and no small bubbles" in a high-temperature processing environment is almost impossible. Artists regard bubbles as expressing the life texture of glass from production to completion. The uniqueness of bubbles has become part of the appreciation of glass art. The bubbles in the glass are equivalent to the tiny concave lens, which can cause light scattering and refraction. The double refraction of the bubbles and the refraction of light also make the glass brighter.

Complicated glass electroplating
In order to achieve a variety of colors, modeling lamps and lanterns are made by glass electroplating. The glass electroplating technology mainly adopts the liquid film forming method, which uses the liquid itself or the liquid as a medium to produce a film on the glass by chemical or electrochemical action. Among them, the acid etching method is the most common electroplating method. The acid etching method is used to etch the silicate glass in a dilute acid solution which produces unstable silicic acid to coast the surface of glass. After heating, it is dehydrated to form a SiO 2 film, and the glass surface is baked to generate silicon dioxide. It is difficult to be flawless, because of its complicated construction method. The glass electroplating product has some light leakage or small scratches, and the product will fade after long usage. Please recognize the physical characteristics before purchasing.

• The products are made with natural material, like wood and marble, and therefore results will vary slightly, so please take this into consideration.

 

*
 
ProductSize(±5cm)Light sourceMaterialColorPrice
35cmLamp body W38*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
E27*1walnut walnut NT$1,990
60cmLamp body W60*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
NT$2,240
85cmLamp body W85*D18*H8.5cm
Base diameter 10*H2.5cm
Wire length 180cm
NT$3,100
Product Liability Insurance: This product has been insured with Tokio Marine Newa Insurance Co., Ltd. Product Liability Insurance of NT$36,000,000.

*

Related products

LED-E27-TAY-G45-5W

Full Voltage,4000K

From NT 126 (≈ USD 4.1958)

LED-E27-TAY-G45-5W

Full Voltage,3000K

From NT 126 (≈ USD 4.1958)

LED-E27-G45 Dragon Ball-3W

Full Voltage,3000K

From NT 195 (≈ USD 6.4935)

LED-E27-G45 Dragon Ball-3W

Full Voltage,6000K

From NT 195 (≈ USD 6.4935)

LED-E27-TAY-G45-5W

Full Voltage,6000K

From NT 126 (≈ USD 4.1958)

LED-E14-G45 Dragon Ball-3W-White Block

3W,6000K

From NT 315 (≈ USD 10.4895)

LED-E14-G45 Dragon Ball-3W-White Block

3W,3000K

From NT 315 (≈ USD 10.4895)

LINE LINE ID: @18PARKN